Indonesia 1×75 T/H Medium Temperature and Medium Pressure Circulating Fluidized Bed Boiler
Technical specification requirements of 75 tons CFB Boiler:
1. Rated evaporation capacity: 75t/h
2. Rated steam outlet pressure: 3.82MPa
3. Rated steam outlet temperature: 450℃
4. Water supply temperature: 130℃
5. Pollutant discharge rate: 2%
6. Exhaust smoke temperature: ≤145℃
7. Design thermal efficiency: ≥89%
8. Thermal efficiency guarantee value: ≥88%
Circulating Fluidized Bed Boiler
Design Fuel
1. The boiler fuel is bituminous coal, and the elements of the coal are as follows: (provided by the purchaser)
- Low calorific value: 4200-5500kcal/kg,
- Volatile content: ≥20%
- Moisture: 9-10%
- Ash content: 25%
- Sulfur content: 1% or less
2. Fuel particle size 0-10mm
3. Limestone particle size ≤2mm Desulfurization efficiency ≥85% when the ratio of calcium to sulfur is 2~2.5
75 ton CFB steam boiler exported to Sri Lanka
- Model: CFB steam boiler
- Capacity: 75 ton
- Application: Chemical company
- Application background: In order to meet production needs, a large chemical company in Sri Lanka, ordered a 75t biomass fired circulating fluidized bed steam boiler from ZG through many times investigation to increase the production efficiency,save the production cost, and bring greater profits for the enterprise.The region is rich in agricultural resources, and a large number of biomass fuels are available there. The chemical enterprise requires a lot of high temperature steam in the process of production, biomass fired CFB boiler can provide adequate steam, and achieve the effect of energy conservation and environmental protection, which is the best choice for the enterprise.