Effective maintenance of AAC Plant
AAC Plant have many operation matters needing noticing in operation,because a device affects the whole production line,the effective maintenance of aac plant are as follows:
Before the use of mortar mixer,it must be tested by the construction safety management department to ensure its quality,the installation place should be flat,the mechanical installation should be solid and stable.
Power utilization of temporary construction should have the neutral protection,leakage protection and three level power distribution and polarity protection.General agitator are unidirectional rotation,so,when the power is connected,we should pay attention to the direction of the arrow on mixing drum.
Before starting,check that whether the insulation and ground connection of electrical equipment is good (if protective grounding is adopted),and whether the belt wheel cover is complete.
After starting, free-load running should be conducted first to check that whether the rotation direction of mixing blade is right.
When the mortar mixer charges,using foot to trample is not allowed,tools can not collide the mixing blade,people can not stop below the mixer hopper,when the bucket stops,hang up the safety hook.
In operation,do not put hand or stick into the mixing drum and clean the mortar at the mouth of drum.
If the malfunction occurred in operation,we should cut off the power,pour the mortar in drum to troubleshoot.
After operation,we should do the cleaning and maintenance work inside and outside the mortar mixer,cut off the power and lock the door.
The aac plant of Zhengzhou Boiler Co., Ltd have the leading technology,good after-sales service and the first-class technical adviser to free you from extra worries,which contribute to her unshakable position.
